Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her

CISCO MDS 9250I 50 PORT SWITCH BASE CONFIG BUNDLE 20X16G FC OPTICS EN CPNT

Forsiden Kommunikation Switche CISCO MDS 9250I 50 PORT SWITCH BASE CONFIG BUNDLE 20X16G FC OPTICS EN CPNT
CISCO MDS 9250I 50 PORT SWITCH BASE CONFIG BUNDLE 20X16G FC OPTICS   EN CPNT (DS-C9250ID16GSFPK9)

CISCO MDS 9250I 50 PORT SWITCH BASE CONFIG BUNDLE 20X16G FC OPTICS EN CPNT

Varenr.:
DS-C9250ID16GSFPK9
  • Produkt Administreret
  • Porte 1
  • Hastighed 16Gbps
582.843,-
728.553,75 inkl. moms
Antal:
Beskrivelse

DS-C9250ID16GSFPK9

MDS 9250i 50 port switch base config bundle with 20 16G FC SFPs

Cisco MDS 9250i Multiservice Fabric Switch


The Cisco® MDS 9250i Multiservice Fabric Switch (Figure 1), the next generation of the highly flexible, industry‑leading, proven Cisco MDS 9200 Series Multiservice Switches, is an optimized platform for deploying high‑performance SAN extension solutions, distributed intelligent fabric services, and cost-effective multiprotocol connectivity for both open systems and mainframe environments. With a compact form factor and advanced capabilities normally available only on director-class switches, the Cisco MDS 9250i is an ideal solution for departmental and remote branch-office SANs as well as in large-scale SANs in conjunction with the Cisco MDS 9710 Multilayer Director.

The Cisco MDS 9250i offers up to forty 16-Gbps Fibre Channel ports, two 10 Gigabit Ethernet IP storage services ports, and eight 10 Gigabit Ethernet Fibre Channel over Ethernet (FCoE) ports in a fixed two-rack-unit (2RU) form factor. The Cisco MDS 9250i connects to existing native Fibre Channel networks, protecting current investments in storage networks. The Cisco SAN Extension over IP application package license is enabled as standard on the two fixed 10 Gigabit Ethernet IP storage services ports, enabling features such as Fibre Channel over IP (FCIP) and compression on the switch without the need for additional licenses. Also, using the eight 10 Gigabit Ethernet FCoE ports, the Cisco MDS 9250i platform attaches to directly connected FCoE and Fibre Channel storage devices and supports multitiered unified network fabric connectivity directly over FCoE.

Specifications:

Product compatibility

Cisco MDS 9000 Family

Software compatibility

Cisco MDS 9000 NX-OS Release 6.2(2) or later
Cisco MDS 9000 NX-OS Release 6.2(2) or later for Cisco Prime DCNM support

Protocols

Fibre Channel standards

FC-PH, Revision 4.3 (ANSI INCITS 230-1994)

FC-PH, Amendment 1 (ANSI INCITS 230-1994/AM1-1996)

FC-PH, Amendment 2 (ANSI INCITS 230-1994/AM2-1999)

FC-PH-2, Revision 7.4 (ANSI INCITS 297-1997)

FC-PH-3, Revision 9.4 (ANSI INCITS 303-1998)

FC-PI, Revision 13 (ANSI INCITS 352-2002)

FC-PI-2, Revision 10 (ANSI INCITS 404-2006)

FC-PI-3, Revision 4 (ANSI INCITS 460-2011)

FC-PI-4, Revision 8 (ANSI INCITS 450-2008)

FC-PI-5, Revision 6 (ANSI INCITS 479-2011)

FC-FS, Revision 1.9 (ANSI INCITS 373-2003)

FC-FS-2, Revision 1.01 (ANSI INCITS 424-2007)

FC-FS-2, Amendment 1 (ANSI INCITS 424-2007/AM1-2007)

FC-FS-3, Revision 1.11 (ANSI INCITS 470-2011)

FC-LS, Revision 1.62 (ANSI INCITS 433-2007)

FC-LS-2, Revision 2.21 (ANSI INCITS 477-2011)

FC-SW-2, Revision 5.3 (ANSI INCITS 355-2001)

FC-SW-3, Revision 6.6 (ANSI INCITS 384-2004)

FC-SW-4, Revision 7.5 (ANSI INCITS 418-2006)

FC-SW-5, Revision 8.5 (ANSI INCITS 461-2010)

FC-GS-3, Revision 7.01 (ANSI INCITS 348-2001)

FC-GS-4, Revision 7.91 (ANSI INCITS 387-2004)

FC-GS-5, Revision 8.51 (ANSI INCITS 427-2007)

FC-GS-6, Revision 9.4 (ANSI INCITS 463-2010)

FCP, Revision 12 (ANSI INCITS 269-1996)

FCP-2, Revision 8 (ANSI INCITS 350-2003)

FCP-3, Revision 4 (ANSI INCITS 416-2006)

FCP-4, Revision 2b (ANSI INCITS 481-2011)

FC-SB-2, Revision 2.1 (ANSI INCITS 349-2001)

FC-SB-3, Revision 1.6 (ANSI INCITS 374-2003)

FC-SB-3, Amendment 1 (ANSI INCITS 374-2003/AM1-2007)

FC-SB-4, Revision 3.0 (ANSI INCITS 466-2011)

FC-BB-2, Revision 6.0 (ANSI INCITS 372-2003)

FC-BB-3, Revision 6.8 (ANSI INCITS 414-2006)

FC-BB-4, Revision 2.7 (ANSI INCITS 419-2008)

FC-BB-5, Revision 2.0 (ANSI INCITS 462-2010)

FC-VI, Revision 1.84 (ANSI INCITS 357-2002)

FC-SP, Revision 1.8 (ANSI INCITS 426-2007)

FC-SP-2, Revision 2.71 (ANSI INCITS 496-2012)

FAIS, Revision 1.03 (ANSI INCITS 432-2007)

FAIS-2, Revision 2.23 (ANSI INCITS 449-2008)

FC-IFR, Revision 1.06 (ANSI INCITS 475-2011)

FC-FLA, Revision 2.7 (INCITS TR-20-1998)

FC-PLDA, Revision 2.1 (INCITS TR-19-1998)

FC-Tape, Revision 1.17 (INCITS TR-24-1999)

FC-MI, Revision 1.92 (INCITS TR-30-2002)

FC-MI-2, Revision 2.6 (INCITS TR-39-2005)

FC-MI-3, Revision 1.03 (INCITS TR-48-2012)

FC-DA, Revision 3.1 (INCITS TR-36-2004)

FC-DA-2, Revision 1.06 (INCITS TR-49-2012)

FC-MSQS, Revision 3.2 (INCITS TR-46-2011)

Fibre Channel classes of service: Class 2, Class 3, and Class F
Fibre Channel standard port types: E, F, FL, and B
Fibre Channel enhanced port types: SD, ST, and TE
IP over Fibre Channel (RFC 2625)

Protocols (continued)

IPv6, IPv4, and Address Resolution Protocol (ARP) over Fibre Channel (RFC 4338)
Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs
IP standards

RFC 791 IPv4

RFC 793 and 1323 TCP

RFC 894 IP/Ethernet

RFC 1041 IP/802

RFC 792, 950, and 1256 ICMP

RFC 1323 TCP performance enhancements

RFC 2338 VRRP

RFC 2460 and 4291 IPv6

RFC 2463 and 4443 ICMPv6

RFC 2461 and 2462 IPv6 neighbor discovery and stateless autoconfiguration

RFC 2464 IPv6/Ethernet

RFC 3270 and 3980 iSCSI

RFC 3643 and 3821 FCIP

Ethernet standards

IEEE Std 802.3-2005 Ethernet

IEEE Std 802.1Q-2005 VLAN

IPsec

RFC 2401 and 4301 security architecture for IP

RFC 2403 and 2404 HMAC

RFC 2405, 2406, 2451, and 4303 IP ESP

RFC 2407 and 2408 ISAKMP

RFC 2412 OAKLEY Key Determination Protocol

RFC 3566, 3602, and 3686 AES

Internet Key Exchange (IKE)

RFC 2409 IKEv1

RFC 4306 IKEv2

Cards, ports, and slots

Fixed configuration with 40 ports of 16-Gbps Fibre Channel and 10 ports of 10 -Gigabit Ethernet

Features and Functions

Fabric services

Name server
Internet Storage Name Server (iSNS)
Registered State Change Notification (RSCN)
Login services
Fabric Configuration Server (FCS)
Public loop
Broadcast
In-order delivery

Advanced functions

VSAN
IVR
PortChannel with multipath load balancing
Flow-based and zone-based QoS
FCIP tape read and write acceleration
FICON over FCIP tape read and write acceleration (pipelining)
FICON XRC (z/OS Global Mirror) acceleration

Diagnostics and troubleshooting tools

POST diagnostics
Cisco Generic Online Diagnostics (GOLD)
Internal port loopbacks
SPAN and Remote SPAN (RSPAN)
Fibre Channel traceroute
Fibre Channel ping
Fibre Channel debug
Cisco Fabric Analyzer
Syslog
Online system health
Port-level statistics
Real-Time Protocol (RTP) debug

Network security

VSANs
ACLs
Per-VSAN RBAC
Fibre Channel zoning
N-port Worldwide Name (WWN)
N-port FC-ID
Fx-port WWN
Fx-port WWN and interface index
Fx-port domain ID and interface index
Fx-port domain ID and port number
iSCSI zoning
iSCSI name
IP address
FC-SP
DH-CHAP switch-to-switch authentication
DH-CHAP host-to-switch authentication
Port security and fabric binding
IPsec for FCIP and iSCSI
IKEv1 and IKEv2
Management access
SSHv2 implementing AES
SNMPv3 implementing AES
SFTP

FICON

FC-SB-3 compliant
Cascaded FICON fabrics
Intermix of FICON and Fibre Channel Protocol traffic
CUP management interface

Serviceability

Configuration file management
ISSU for Fibre Channel interfaces
Cisco Call Home
Power-management LEDs
Port beaconing
System LED
SNMP traps for alerts
Network boot

Performance

Port speed: 4/8/16-Gbps autosensing, optionally configurable
Buffer credits: 64 per port (shared-mode ports) and up to 256 on an individual port (dedicated-mode ports with optional Cisco MDS 9000 Enterprise package license activated)
Ports per chassis: 40 ports of 16-Gbps Fibre Channel and 10 ports of 10-Gigabit Ethernet
Ports per rack: Up to 1050
PortChannel: Up to 16 physical links
FCIP tunnels: Up to 6 per port

Speed

Media

Distance

Supported Cisco optics, media, and transmission distances

8-Gbps SW, LC Enhanced Small Form-Factor Pluggable (SFP+)
8-Gbps SW, LC SFP+
8-Gbps SW, LC SFP+
8-Gbps LW, LC SFP+
16-Gbps SW, LC SFP+
16-Gbps SW, LC SFP+
16-Gbps SW, LC SFP+
16-Gbps SW, LC SFP+
16-Gbps LW, LC SFP+
50-micron multimode (OM3)
50-micron multimode (OM2)
62.5-micron multimode
9-micron single mode
50-micron multimode (OM4)
50-micron multimode (OM3)
50-micron multimode (OM2)
62.5-micron multimode (OM1)
9-micron single mode
150m
50m
21m
10 km
125m
100m
35m
15m
10 km

Reliability and availability

ISSU
Hot-swappable, 2+1 redundant power supplies
Hot-swappable fan tray with integrated temperature and power management
Hot-swappable SFP+ optics
Passive backplane
Stateful process restart
Any port configuration for PortChannels
Fabric-based multipathing
Per-VSAN fabric services
Port tracking
VRRP for management and FCIP or iSCSI connections
Online diagnostics

Network management

Access methods

Out-of-band 10/100 Gigabit Ethernet port

RS-232 serial console port

In-band IP over Fibre Channel

In-band FICON CUP over Fibre Channel

Access protocols

CLI using the console and Ethernet ports

SNMPv3 using the Ethernet port and in-band IP over Fibre Channel access

Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S)

FICON CUP

Distributed device alias service
Network security

Per-VSAN RBAC using RADIUS and TACACS+-based authentication, authorization, andaccounting (AAA) functions

SFTP

SSHv2 implementing AES

SNMPv3 implementing AES

Management applications

Cisco MDS 9000 Family CLI

Cisco Prime DCNM

Cisco Device Manager

Programming interfaces

Scriptable CLI
Cisco Prime DCNM web services API
Cisco Device Manager GUI

Environmental

Temperature, ambient operating: 32 to 104°F (0 to 40°C)
Temperature, ambient nonoperating and storage: 40 to 158°F (-40 to 70°C)
Relative humidity, ambient (noncondensing) operating: 10 to 90%
Relative humidity, ambient (noncondensing) nonoperating and storage: 10 to 95%
Altitude, operating: -197 to 6500 ft (-60 to 2000m)

Physical dimensions

Dimensions (H x W x D): 3.84 x 17.22 x 21.4 in. (9.75 x 43.74 x 54.36 cm), 2RUs; all units rack mountable in standard 19-inch Electronic Industries Alliance [EIA] rack)
Weight of fully configured chassis: 22.4 lb (10.2 kg)

Power and cooling

Power supply: 300W AC
Power cord: Notched C15 socket connector connecting to C16 plug on power supply
AC input characteristics
100 to 240V AC (10% range)
50 to 60 Hz (nominal)
Airflow (front to back)
200 linear feet per minute (LFM) through system fan assembly
Cisco recommends maintaining a minimum air space of 2.5 in. (6.4 cm) between walls and chassis air vents and a minimum horizontal separation of 6 in. (15.2 cm) between two chassis to prevent overheating

Approvals and compliance

Safety compliance
CE Marking
UL 60950
CAN/CSA-C22.2 No. 60950
EN 60950
IEC 60950
TS 001
AS/NZS 3260
IEC60825
EN60825
21 CFR 1040
EMC compliance
FCC Part 15 (CFR 47) Class A
ICES-003 Class A
EN 55022 Class A
CISPR 22 Class A
AS/NZS 3548 Class A
VCCI Class A
EN 55024
EN 50082-1
EN 61000-6-1
EN 61000-3-2
EN 61000-3-3

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.